There seems to only be a mounting option for the Bondtech QR for the rostock printers so I went ahead and created this easy drop in mount that goes in the place of the EZR Struder. The mount is 3mm thick to give the proper spacing you need for the drive gear on the BMG. The stepper hole is a tight tolerance but if you printer is tuned well it should snap on to the motor. You will be reusing the two base screws from the EZR that had lock nuts and they will reuse the same hole locations. Since there are 4 holes where the stepper mounts you can use both left and right handed versions of the extruder.
@ 2016 Your Sitename, All rights reserved. Material Design is a design language developed by Google. Material Design makes more liberal use of grid-based layouts and responsive animations and transitions. Powered by VanillaForums, Designed by ThemeSteam